Engineered Hardwood Floors Vs Traditional Hardwood and Laminate Floors

Engineered Hardwood Floors

When searching for hardwood floors, there are various choices in plank width, wood species, colors and how each one of these hardwoods are manufactured. Creating a choice of the perfect fit for the home can seem overwhelming. Simplify your choice with probably the most versatile types of hardwood flooring available today.

Engineered hardwood flooring could be installed in nearly every room in your home, even those with a moisture exposure of up to 4%. Traditional hardwood is normally installed in moisture-free areas such as family rooms, dining rooms or living rooms. With engineered hardwood, one can will have wood floors installed in kitchens, master bathrooms, and guest bathrooms or in basements. One note however, is always to avoid installing any sort of hardwood in a child’s bathroom, as there are ample instances for accidents close to the toilet or overflow from the tub/shower.

Acting as a defense contrary to the wood’s natural tendency to expand and contract under humid conditions, engineered hardwood is made of several layers of natural wood and glued together, for added strength. During the layering process, each ply of wood is defined atop the other in the opposite direction. Each layer of engineered hardwood is really a thin layer variation of natural hardwood or softer plywood incorporating the tongue and groove system. Nevertheless the top layer, or veneer, is really a thicker layer of the chosen wood species and will withstand the daily wear and tear associated with the room.

Most hardwoods today are delivered pre-finished. lubbockinsulationcontractor.com This added benefit of engineered hardwood allows the homeowner to begin using the room soon after installation. Through the finishing process, engineered hardwood is cured with a UV light. Factory finishes cured via ultra-violet light have a harder finish overall and the factory can prepare the wood with a greater number of coats to lessen damage for the future.

One can still purchase unfinished hardwoods today. Though it is very important remember that unfinished hardwoods require a fantastic amount of time to use the mandatory coats at the job-site which means the room will never be available for use until complete. Some additional detriments to installing unfinished hardwoods are: the vapors connected with finishing the floor on-site, the reduced amount of coats being applied and the lack of ability to seal the final with the UV light process.

Now that we’ve learned some of the benefits of engineered hardwood, let’s review your options obtainable in the manufacturing process. Engineered hardwood is made in three variations.

1. Rotary Peeled Veneers: Processed in a conditioning vat and placed into a large wood lathe.
2. Layers: Peeled off the sign in long strips.
3. Grain: Visually weak
4. Structural integrity: Weak
5. Production Cost: Low Cost
6. Yield from log: Maximum

1. Sliced: Processed in a conditioning vat.
2. Layers: Sliced off the log as if it were cheese.
3. Grain: Visually good
4. Structural integrity: Better
5. Production Cost: Medium Cost
6. Yield from log: High

1. Sawed Face: Traditional process by way of a saw mill.
2. Layers: Graded, sorted then sawed into desired thickness
3. Grain: Visually best
4. Structural integrity:Best
5. Production Cost: Highest Cost
6. Yield from log: Low

Choices made from the information in the table will be determined by using the room where in fact the material will undoubtedly be installed. Cost is usually a factor in any home remodeling project and certain types of processed wood will fit better into the project budget than others. The choices will still provide the finished project with a clean and durable product, that will last longer than most other types of flooring materials. In fact, engineered hardwood flooring can last between 40 and 60 years with the proper care and normal wear and tear.

Even if the ground begins showing some wear after heavy usage, engineered hardwood can be sanded between 3 and 5 times before it needs to be replaced altogether. However, because engineered hardwoods could be damaged easily in the sanding process, it is highly recommended that a hardwood floor sanding professional is obtained given the sanding process and the chemicals found in the refinishing process.

Installation of engineered hardwood can be handled in several ways. Planks may be stapled-down, glued-down or floated over several types of sub-floors. The most popular installations for concrete slabs are glue-down and floating, due to the fact it is not possible to staple or nail into concrete when installing engineered hardwood.

However, some types of engineered hardwood can also be floated over existing floors such as for example tile or vinyl flooring. Though it is very important check with the manufacturer specifications for this process in fact it is equally important or even more so that the current sub-floor is stable and well adhered to the joists in order to avoid shifting, breakage or heaving of the newly installed product.

You can chose from an ample selection of wood species. For pretty much every species obtainable in natural hardwood, there is an equivalent species in engineered hardwood such as for example oak, maple, or hickory and many others. There are also a number of plank width options that may be mixed up for a custom installation or uniform as in a normal installation. Consider the traditional linear look with 2 �” width strip flooring, casual elegance with 3″ width plank flooring or perhaps a patterned look with random widths of 3″, 5″ & 7″.